Genesal Energy reinforces the operational capacity of the UME with generating sets for emergencies
12 August - 2025

The Military Emergency Unit (UME) is a reference in the management of critical situations, from natural disasters to rescue operations in extreme conditions.
To guarantee its response capacity and operability in any environment, Genesal Energy has designed and supplied 17 mobile generator sets specially adapted to be installed in multipurpose trucks.
The multi-purpose trucks are designed for action as they are equipped with cranes, snow ploughs, generators and other devices, and represent a key tool for the operations of the Unit. Therefore, they needed custom-designed generator sets to provide power in situations where there is no access to the grid, ensuring equipment operability and effectiveness in emergency missions.
The importance of equipment in a military environment
UME trucks must be prepared to face a wide range of scenarios, from urban areas affected by disasters to remote areas with extreme conditions. Their on-board generator sets must offer maximum reliability in continuous use and be adapted to Stage V emissions regulations, ensuring environmental sustainability.
They have low noise levels for use in residential environments, high strength and durability to withstand intensive use in the most demanding conditions.
A tailor-made solution in technology which meets the following conditions:
- High reliability, with specific reinforcements for installation and prolonged use on trucks.
- Socket panel, allowing multiple electrical devices to be safely connected.
- Soundproof design, with internal baffles that minimise noise during operation.
- Stage V compliant, ensuring low emissions and environmental friendliness.
- RAL according to specific standards defined by the UME.
In emergency situations, having adapted and safe equipment makes the difference between an effective response and a limited one. With these 17 generator sets, the UME reinforces its capacity for action, ensuring energy in any scenario and improving its ability to protect people and the environment.
This project highlights our commitment to specialised energy solutions, designed to meet the highest standards of quality and adaptability. Genesal Energy knows that energy is the key to action and we work to ensure that it is never lacking, even in the most critical moments.
Our engineering solution
The engineering department designed a highly reliable generator, with a socket panel for connection to various electrical appliances. Its interior design includes baffles and drawers to avoid noise emissions as much as possible. The colour of the equipment is red, defined by the customer, according to EMU standards. In addition, the corresponding reinforcements for truck mounting and other elements necessary to operate the unit safely.
Specific features
- Under nominal conditions, this genset operates at a frequency of 50 Hz and a speed of 1500 rpm, delivering a continuous power output (PRP) of 60 kVA. It is configured for three-phase voltage of 400/230 V, using an FTP engine model F34TEVP01.00 and a Stamford S1L2 Y1 alternator.
- It includes a 200-litre fuel tank and is housed in a special soundproofed canopy measuring 2900 mm, ensuring a noise attenuation of up to 65 dB at 7 metres.
- The unit is controlled via a ComAp InteliLite MRS 16 IL4 controller, with start-up activated by an external signal.
- To ensure compliance with Stage V regulations when required, the generator automatically increases its speed to 1800 rpm to regenerate the particle filter.
- Compliance with Royal Decree RD 842/2002, specifically ITC-BT 40, is fully guaranteed.
Discover more Genesal Energy case studies
View all case studiesContact
Do you need a generator set?
Fill in the form with your information if you want one of our generator sets or if you have any questions. We will prepare a quotation for you based on your requirements.

Customer Service Telephone/Fax:
Customer service team Email